System COP

PUR

AVAILABLE THICKNESSES

From 30 to 120 mm (Other thickness values available on request)

DIMENSIONS

Standard length: 1000 mm
Maximum length: 13000 linear mm

JOINT

Standard joint with the empty rib overlapping on the full rib.

TYPE OF INSULATION

Standard joint with the empty rib overlapping on the full rib

RIBS

The outer sheet has a profile with 5 ribs that are 40 mm high with a pitch of 250 mm. The ribs are filled with polyurethane foam and have a lower width of 60 mm and an upper width of 30 mm

CERTIFICATIONS

Reaction to fire as per the EN 13501-1:2009 standard
0497/CPR/3349 EC certificate of constancy of performance conforming to the EN 14509:2013 standard

SUPPORTS

Hot-dip galvanised steel (UNI EN 10346) pre-coated with coil coating cycles
Hot-dip galvanised steel (UNI EN 10346) pre-coated and embossed
Plasticised steel: (UNI EN 10147)
Natural aluminium, pre-coated and/or embossed: (UNI EN 9003/3 and UNI EN 10372)
AISI 304-316-340 stainless steel with 2B finish: (UNI EN 10088-1:2014)
Pre-coated stainless steel

THICKNESS OF SUPPORTS

From 0.4 mm to 1.0 mm maximum (other thickness values available on request)

Technical sheet System COP

Brochure PUR

Product catalogue